For those who have a site as well as an web app, rate of operation is critical. The quicker your web site performs and then the quicker your web apps perform, the better for everyone. Because a website is only an offering of files that interact with one another, the devices that keep and work with these data files have a crucial role in site operation.

Hard disks, or HDDs, have been, right up until recent times, the most efficient systems for keeping information. Nevertheless, in recent years solid–state drives, or SSDs, have already been becoming popular. Check out our comparison chart to check out if HDDs or SSDs are more appropriate for you.

1. Access Time

Image

With the introduction of SSD drives, data access rates have gone tremendous. Thanks to the brand–new electronic interfaces utilised in SSD drives, the common data file access time has been reduced towards a record low of 0.1millisecond.

Image

HDD drives count on rotating disks for data storage uses. When a file is being used, you will need to wait around for the correct disk to get to the correct position for the laser beam to reach the data file involved. This ends in a typical access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

With thanks to the very same revolutionary technique enabling for quicker access times, it is possible to take pleasure in better I/O efficiency with SSD drives. They’re able to conduct double as many functions within a specific time compared to an HDD drive.

An SSD can handle at least 6000 IO’s per second.

Image

With a HDD drive, the I/O performance progressively improves the more you employ the drive. However, once it reaches a particular limitation, it can’t go swifter. And due to the now–old technology, that I/O cap is noticeably less than what you can get with an SSD.

HDD can only go so far as 400 IO’s per second.

3. Reliability

Image

The lack of moving components and spinning disks in SSD drives, and also the latest developments in electronic interface technology have resulted in a much reliable file storage device, with a typical failure rate of 0.5%.

Image

As we have noted, HDD drives rely on spinning hard disks. And something that uses a large number of moving parts for extended periods of time is liable to failure.

HDD drives’ regular rate of failing ranges somewhere between 2% and 5%.

4. Energy Conservation

Image

SSD drives are usually small compared to HDD drives as well as they don’t have virtually any moving parts whatsoever. As a result they don’t produce just as much heat and require a lot less electricity to function and much less energy for cooling purposes.

SSDs use up somewhere between 2 and 5 watts.

Image

HDD drives can be known for becoming noisy; they can be at risk of heating up and in case you have several hard drives inside a server, you have to have a further air conditioning system just for them.

In general, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

Image

The faster the data file accessibility speed is, the quicker the data calls will likely be adressed. As a result the CPU will not have to reserve assets looking forward to the SSD to respond back.

The regular I/O delay for SSD drives is just 1%.

Image

HDD drives permit reduced access rates in comparison with SSDs do, resulting for the CPU being forced to wait around, while saving resources for your HDD to locate and return the demanded file.

The typical I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

In real life, SSDs function as wonderfully as they did during the testing. We competed a full system back up using one of the production web servers. Over the backup procedure, the common service time for I/O queries was basically below 20 ms.

Image

Weighed against SSD drives, HDDs offer substantially reduced service rates for I/O demands. Throughout a server backup, the regular service time for an I/O request can vary somewhere between 400 and 500 ms.

7. Backup Rates

Image

Another real–life development is the rate at which the back up has been created. With SSDs, a web server back–up currently takes only 6 hours implementing our web server–designed software.

Image

Throughout the years, we have got worked with primarily HDD drives on our servers and we’re familiar with their effectiveness. With a web server equipped with HDD drives, an entire web server backup often takes about 20 to 24 hours.

To be able to instantaneously add to the general performance of your sites with no need to adjust any code, an SSD–powered hosting service is really a really good alternative. Examine our Linux shared website hosting packages as well as our Linux VPS web hosting – our solutions have quick SSD drives and can be found at affordable prices.

  • Service guarantees

  •  
  • Each of our Virtual Private Servers is put together for you completely free. 99.9% network uptime. Full root server access rights.

  • Compare our prices

  •  
  • Find out more about our pricing and choose the very best Virtual Private Server for your dynamic websites. It is easy to upgrade to a more advanced VPS Web Hosting package with just a click of the mouse.
  • Compare our hosting plans

  • Contact Us

  •  
  • We are available for you night and day to reply to any inquiries about our VPS Web Hosting services. 1–hour reply–back time guarantee.